Bose Speaker System SOUNDLINK User Manual

0

Out of 0 Ratings

Owner's of the Bose Speaker System SOUNDLINK gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 24
 
18 – English
CARE AND MAINTENANCE
Power saving mode
The power saving mode allows the system to consume only a minimum amount of
power. It can be used to reduce the power consumed in your home while you are away.
To switch the system to the power saving mode, press and hold the power button for 10
seconds or until the front panel indicators are off.
Note: The Wi-Fi connection is discontinued when switching to the power saving mode.
Updating system software
Occasionally, software updates become available to improve the performance of your
system. The following is the preferred method for installing software updates.
Note: For another software update method, see “Alternate update method” on page 19.
Software update procedure
1. Make sure your SoundLink
®
Air system is connected to your Wi-Fi
®
network and that
there is an Internet connection. The front panel Wi-Fi indicator ( ) should be solid
blue.
2. On the remote, press and hold Mute ( ) for five seconds while watching the front
panel Wi-Fi indicator.
• If the Wi-Fi indicator double-blinks green twice, you can release the Mute button.
This means that the system software is up to date and the system will return to the
previous operating mode.
• If the Wi-Fi indicator starts quickly blinking green, release the Mute button:
This means that a software update is necessary and the software automatically
starts downloading. The Wi-Fi indicator continues blinking until the download is
finished. While the software update is installed, the Wi-Fi indicator glows solid
green for three seconds followed by a double blink. This pattern repeats until the
installation is finished. At the end of the installation, the system emits a tone and
automatically restarts. After restart, the system will automatically connect to your
Wi-Fi network again.
CAUTION: Do not remove power from the SoundLink Air system while updating the system
software.
Note: If the Wi-Fi indicator starts blinking red, a system error has occurred. Contact Bose Customer
Service for assistance.
Whippet_OG.book Page 18 Monday, August 6, 2012 11:11 AM

   Find Your Products By Category