Cuisinart Blender CPB-300 User Manual

0

Out of 0 Ratings

Owner's of the Cuisinart Blender CPB-300 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 17
 
5
TRAVEL CUP OPERATION
1. Put food ingredients into the travel cup, and then attach blade
assembly.
Note: Blade assemblies are interchangeable based on recipes and
desired end results.
2. With the base unit on the tabletop and the unit plugged in, place the
assembled travel cup onto the base and secure into place. The unit
automatically is activated and in Standby mode with the red POWER
LED illuminated and flashing.
3. For continuous blending, press the desired speed. The blue LED light
will illuminate, indicating that the blender is on and running. It is
possible to switch between High and Low speeds by simply pushing
the desired speed button.
4. To pause the blending process, press the activated speed button. The
blending process will stop. The red Standby indicator light will continue
to flash to let you know that the blender is still activated. To reengage
the unit, choose the desired speed.
5. When you have finished blending, press activated speed to put in
Standby mode. Remove the travel cup from the base. Unplug the unit.
6. Turn cup right side up, turn blade assembly counterclockwise to
remove. Attach travel cup lid by twisting clockwise.
CHOPPING CUP OPERATION
1. Put food ingredients into chopper cup filling it to a maximum of
one-quarter of its capacity, then attach blade assembly.
Note: Blade assemblies are interchangeable based on recipes and
desired end results.
2. With the base unit on the tabletop and the unit plugged in, place the
assembled chopper cup onto the base and secure into place. The unit
automatically is activated and in Standby mode with the red POWER
LED illuminated and flashing.
3. To continuously chop, press High or Low speed.
4. To pulse, press Pulse and then desired High or Low speed.
5. When you have finished chopping, press activated speed to put in
Standby mode. Remove the chopping cup from the base. Carefully
remove food with a spatula. NEVER TOUCH THE BLADE ITSELF.
Unplug the unit.
OPERATING AND SAFETY TIPS
• Makesuretheelectricaloutletisratedatthesamevoltageasthat
stated on the bottom of the blender motor base.
• Alwaysusetheblenderonaclean,sturdyanddrysurface.
• Alwaysoperatetheblenderjarwiththecoveron.Placecoveronfirmly.
Keep the blender jar cover on the blender jar while blending.
• Don’tputhandsinsidetheblenderjarwhenblenderispluggedin.
• Don’tremoveblenderjarorcupswhileunitisrunning.
• Don’t place blade assembly onto motor base without the jar or
cup attached.
• Makesurebladeassemblyistightlyattachedtojarorcups.
• Alwaysremovebladeassemblybeforecleaning.
• Don’t twist blade assembly from blender jar or cups when
removing from motor base. Simply lift jar or cups from motor
base.
• Usearubberorplasticspatulaasneeded,onlywhentheblenderis
turned off. Do not use any utensil inside the blender while motor is on.
• Neverusemetalutensils,asdamagemayoccurtothejar,cupor
cutting assembly.
• Don’tstorefoodorliquidsinyourblenderjar.
• Don’toverloadblenderjarorcups.Ifthemotorstalls,turntheblender
off immediately, unplug the unit and let it cool for at least 15 minutes.
Then, remove a portion of the food and continue.
• Don’tblendhotliquidsorcarbonatedbeveragesinchopperandtravel
cups.
• Don’tuseanycontaineroraccessoriesnotrecommendedbyCuisinart.
Doing so may result in injury.
• Toremovejarorcupliftstraightup.Donottwisttoremove.
• Thejar,choppingcupandtravelcupsarenotrecommendedfor
microwave use.

   Find Your Products By Category