3.7
Owner's of the Samsung Refrigerator RF4287HARS gave it a score of 3.7 out of 5. Here's how the scores stacked up:
08_ setting up
Setting up your French Door Refrigerator
GETTING READY TO INSTALL THE REFRIGERATOR
Congratulations on your purchase of the Samsung French Door Refrigerator.
We hope you enjoy the state-of-art features and efficiencies that this new appliance offers.
A location with easy access to the water supply.
A location without direct exposure to sunlight.
A location with a leveled floor.
A location with enough space for the refrigerator doors to open easily.
Allow sufficient space to the right, left, back and top for air circulation.
Plaease ensure that appliance can be moved freely in the event of
maintenance & service.
If the refrigerator does not have enough space, the internal cooling system may not
work properly.
If your refrigerator has an ice maker, allow extra space at the back for the water line connections.
When you install the refrigerator next to a fixed wall, you need a minimum clearance of 3 ¾” (95mm) between
the refrigerator and wall to allow the door to swing open.
First thing! Make sure that you can easily move your refrigerator to its final location by measuring doorways (both
width and height), thresholds, ceilings, stairways, etc.
The following chart details the exact height and depth of this Samsung French Door
Refrigerator.
Model Depth “A” Width “B” Height “C”
Overall
Height “D”
Depth “E”
RF4287HA
29½”
(749 mm)
35⅞”
(912 mm)
68⅝”
(1742 mm)
69⅝”
(1768 mm)
36¼”
(922 mm)
Allow clearance to the right, left, back and top when installing.
This will help reduce power consumption and keep your energy bills lower.
Do not install the refrigerator where the temperature will go below 10ºC
(50ºF).
Do not locate the refrigerator where it may become wet.
To prevent floor damage, be sure the front adjusting legs
are in the up position (above the floor).
Refer to ‘Adjusting the doors’ in the manual (on page 19).
FLOORING
For proper installation, this refrigerator must be placed on a leveled
surface of hard material that is the same height as the rest of the
flooring. This surface should be strong enough to support a fully
loaded refrigerator, or approximately 359lbs (165kg). To protect the
finish of the flooring, cut a large section of the cardboard carton and
place it under the refrigerator where you are working. When moving a
refrigerator, you need to pull and push it straight forwards or back. Do
not wiggle it from side to side.
3 inches
3/4
2 inches
2 inches
EE
CC
A
A
BB
DD
CAUTION
Flat-blade
screw driver(-)
Control Lever
DA68-01922B.indb 8 2010.4.24 10:52:5 AM
Find Your Products By Category
Please Login
