Sherwood Car Stereo System Sherwood 5 Disc CD Changer User Manual

0

Out of 0 Ratings

Owner's of the Sherwood Car Stereo System Sherwood 5 Disc CD Changer gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 20
 
17
Troubleshooting Guide
If a fault occurs, run through the table below before taking your unit for repair.
If the fault persists, attempt to solve it by switching the unit off and on again. If this fails to resolve the situation, consult your
dealer. Under no circumstances should you attempt to repair the unit yourself. This could void the warranty.
PROBLEM POSSIBLE CAUSE REMEDY
No power
No play
No sound
Poor or distorted
sound
Sound skips
Programming is not
performed
It takes a long time to
read a disc or an
USB memory device.
• The AC input cord is disconnected.
• Poor connection at AC wall outlet or the outlet
is dead or off.
• The disc is loaded upside down.
• Dirty disc.
• Defective or deeply scratched disc.
• The CD-R/CD-RW disc is nonstandard.
• Music files in non-compatible format are
recorded.
• Incorrect connections.
• Incorrect operation of the amplifier/receiver.
• The “ ” indicator lights up.
• The unit is connected to the PHONO input
jacks of the amplifier/receiver.
• Poor connections.
• Defective or deeply scratched disc.
• The unit is placed on a surface that is subject
to vibration or physical shock.
• The disc is dirty or badly scratched.
• The programming procedure is not correct.
• The number of the programmed tracks/files is
32.
• It may take a longer time to read a disc or an USB
memory device that contains many files and
folders, etc.
• Connect the cord securely.
• Check the outlet using a lamp or another
appliance.
• Reload the disc with the printed side up.
• Clean the disc.
• Load another disc.
• See “Unplayable discs” on page 10.
• Only music files in MP3 and WMA formats can
be played.
• Make connections correctly.
• Operate the amplifier/receiver correctly.
• Press the “ ” button to cancel the pause
mode.
• Make connections correctly.
• Check the connections and connect all cords
securely.
• Play another disc.
• Place this unit on a stable surface.
• Try again with a scratch-free disc.
• Try again.
• Check the number of the programmed
tracks/files.
• This is not mulfuntion.
ENGLISH
CDC-5506 (A)_ENG_11-11-21:CDC-5506(A)_ENG 2011-11-21 오 4:59 페이지 17

   Find Your Products By Category