0

Out of 0 Ratings

Owner's of the Cuisinart Blender DLC-2007N gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 48
 
17
after all ingredients are
incorporated.
Rich doughs will give you
good results after only
30 seconds of kneading.
Blade doesn’t
incorporate ingredients:
Butter or margarine, if not
melted, must be cut into
tablespoon-size pieces
before being added
to work bowl.
Dough blade rises in
work bowl:
Blade may not have been
pushed down as far as
possible before processing
started. Machine may be
overloaded. Remove half
of dough and process in
2 batches.
Motor stops:
See comments under
‘Typical Bread Dough’
Problems and Solutions
Dough doesn’t rise:
See comments under
‘Typical Bread Dough’
Problems and Solutions
CLEANING AND
STORAGE
Keep your food processor
ready to use on a kitchen
counter. When not in use,
leave it unplugged.
Store the blades and discs
as you would sharp knives,
out of the reach of children.
The Disc and Blade Holders
are optional accessories
which offer safe and
convenient storage.
All parts except the housing
base are dishwasher safe,
and we recommend wash-
ing them in the dishwasher
on the top rack. Due to
intense water heat, washing
the work bowl and work
bowl cover on the bottom
rack of your dishwasher
may cause damage over
time. Insert the work bowl
upside down. Remember to
unload the dishwasher
carefully wherever you
place sharp blades and
discs.
To simplify cleaning, rinse
the work bowl, cover,
pusher assembly and blade
or disc immediately after
use so food won’t dry on
them. Openings at the
bottom of the large pusher
provide drainage and make
cleaning easy. If food
lodges in the pusher,
remove it by running
water through it, or use
a bottle brush.
If you wash blades and
discs by hand, do it carefully.
Avoid leaving them in soapy
water where they may
disappear from sight. To
clean the metal blade, fill the
work bowl with soapy water,
hold the blade by its plastic
center and move it rapidly up
and down on the center
shaft of the bowl. Use of a
spray attachment is also
effective. If necessary,
use a brush.
The work bowl is made of
Lexan
®
(plastic), which is
shatter resistant and heat
resistant. It should not be
placed in a microwave
oven, as the aperture at
the front of the pusher
houses the metal rod that
activates the motor.
TIP: When preparing a
meal, make the dishes
with the least amount of
wet ingredients first.
For example, make the
bread first; then you don’t
need to wash the bowl
before making the salad. In
many cases, wiping
the bowl with a paper
towel between recipes
is sufficient.
Chopping certain foods
may scratch or cloud the
work bowl. These foods
include ice, whole spices,
coffee beans and oils like
wintergreen. If you like to
prepare your own spice
blends, you may want to
keep a second bowl just
for that purpose.
The housing base is made
of a tough plastic with high
impact resistance. Its
smooth surface will look
new for years. Keep a
sponge handy as you
work, and wipe spills from
the base.
Four rubber feet on the
underside keep the base
from moving on most work
surfaces when the machine
is processing heavy loads. If
the feet leave spots on the
counter, spray them with a
spot remover and wipe with
a damp sponge. If any trace
of the spot remains, repeat
the procedure and wipe
the area with a damp
sponge and nonabrasive
cleaning powder.
To clean the inside of the
detachable stem, slide the
stem release button on the
side up as far as it will go
and hold it there as you run
water through the stem.
IMPORTANT: Never store
any blade or disc on the
motor shaft. No blade or
disc should be placed on
the shaft except when the
processor is about to
be used.
03CU13535 DLC-2007N IB-5053 10/2/03 2:36 PM Page 18