0
Owner's of the Cuisinart Blender DLC-2007N gave it a score of 0 out of 5. Here's how the scores stacked up:
5. Place work bowl cover
onto work bowl, with
the handle area just to
the left of center. Turn
counterclockwise to
lock onto work bowl.
6. Align pusher with the
feed tube opening on
the work bowl cover and
slide the activating rod
down to the bottom.
7. Use the cord wrap
on the housing base
underside to add or
remove cord.
8. You are now ready to
operate the machine.
THE MACHINE
FUNCTIONS:
PULSE
1. With the machine
properly assembled
and engaged, and
ingredients in the
work bowl, press the
PULSE button
repeatedly as needed.
ON (Continuous)
1. Properly assemble and
engage the machine.
2. To add ingredients
through the feed tube,
remove the pusher and
fill the feed tube as
directed (see preparing
for slicing or shredding).
3. Engage the pusher
and press the ON
button. The button light
will turn on and the
motor will start.
4. Press the pusher firmly
down until all ingredients
have passed into the
work bowl. Remove
the pusher and refill
ingredients as needed.
When you engage the
pusher again, the unit
will automatically
turn ON.
5. Press the OFF button
when finished.
OPERATING
INSTRUCTIONS:
Try chopping some practice
foods, such as a zucchini
or potato, before you
process food to eat. First,
cut the ingredients into
1-inch pieces.
• Place the work bowl over
the center stem, with the
handle area just to the left
of center. Turn counter-
clockwise to lock in place.
• Insert the metal chopping
blade and put ingredient
pieces in the work bowl.
Put on the cover and turn
counterclockwise to lock
onto work bowl. Align the
pusher and the pusher’s
activating rod with the
corresponding openings
on the feed tube, and
push all the way down.
• Press and release the
PULSE button two or three
times. Each time the blade
stops, let the pieces drop
to the bottom of the bowl
before you pulse again.
This puts them in the path
of the blade each time the
motor starts.
• Using the pulse/chopping
technique, you get an
even chop without
overprocessing. Check
the texture frequently
by looking through the
cover. If you want a
finer chop, press and
release the PULSE
button until you achieve
the desired texture.
Onions and other food with
a high water content will
quickly end up as a purée,
unless examined through
the work bowl after each
pulse to make sure they
are not overprocessed.
Try chopping other food
like meat for hamburger
or sausage. Then make
mayonnaise, pastry or
bread, as described in
the following sections. To
obtain consistent results:
Be sure all the pieces you
add to the bowl are about
the same size.
Be sure the amount you
process is no larger than
recommended on the
inside cover of this booklet.
Before you do anything,
wait for the blade to stop
spinning. Once it does,
turn the cover clockwise to
unlock, and remove by lift-
ing it off.
Remove the bowl from the
base of the machine before
removing the blade. This
creates a seal to prevent
food from leaking. Turn the
bowl clockwise to unlock
from the base, and lift
straight up to remove.
To prevent the blade
from falling from the
work bowl onto your
hand when emptying
the work bowl, use one
of the following methods.
Be sure your hands
are dry.
7
03CU13535 DLC-2007N IB-5053 10/2/03 2:36 PM Page 8
Find Your Products By Category
Please Login
